1/48 Lockheed Martin® F-35®B Lightning Ⅱ® plastbyggesett.
Se nedenfor for anbefalte farger.
Fra produsenten:
An Ambitious Design The F-35 Lightning II is an ambitious project that aims to provide – in a single overarching design – aircraft tailored to three different services’ distinct needs; that it does in the form of the F-35A (for the Air Force), F-35B (Marines) and F-35C (Navy). Perhaps the most stunning of the three is the innovative F-35B, which was designed to succeed the AV-8B Harrier II, and is a short takeoff and vertical landing (STOVL) aircraft thanks to a lift fan installed between the cockpit and the engine, plus the 3 Bearing Swivel Module mechanism. Rather impressively, it also manages to combine extremely low observability characteristics with exemplary situational awareness provided by the numerous sensors across the aircraft. The F-35B is expected to serve mainly from aircraft carriers and amphibious assault ships; as of 2023, the British Royal Navy and the Italian Navy have started deployment, and the Japan Air Self Defense Force also expects to see F-35Bs with its units from 2024. |
About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 325mm, wingspan: 222mm. ★The model can be assembled as one of three types: parked, short takeoff and vertical landing. ★Fine recreations of Radar Absorbent Material (RAM) are molded into fuselage surfaces. ★Engine duct and nozzle are assembled into one of three positions depending upon the type of model chosen. ★The engine nozzle is made up of 5 parts and gives an accurate, crisply detailed finish. ★Parts are included for raised and lowered versions of control surfaces. ★A stand is provided for use when assembling a vertical landing model. ★The lift fan is integrated with the nose landing gear bay. ★This model offers excellent fuselage interior detail. ★A full complement of ordnance includes AIM-9X and AIM-120C missiles, plus GBU-12 and GBU-32 bombs. ★A total of seven marking options is included, covering aircraft from three nations.
|
|
 Packaging |
 ★Tamiya designers conducted some seriously in-depth research to capture the stealthy F-35B with such accuracy. |
|
 ★In short takeoff posture, the lift fan intake is open and the engine nozzle points diagonally downward. |
|
 ★Choose whether to assemble the model in stealth mode (no external ordnance), air-to-air mode (missiles only), or beast mode (full ordnance). |
 ★A stand is included to use if you are making a vertical landing model. |
|
 ★The vertical landing model has its roll posts activated and engine nozzle pointing downward, plus two of the weapons bay doors half-open. |
|
 ★Take a look at the F-35 in Beast Mode, with all its ordnance loaded! |
 ★Here are the ordnance parts included in the kit. |
|
 ★The lift fan interior is also depicted with accuracy, and has parts for both open and closed auxiliary duct. |
|
 ★Peep inside the air intake door to see the cover for the lift fan shaft. |
 ★Dedicated parts for open and closed lift fan lower doors, and for short takeoff and vertical landing louver positions. |
|
 ★This image shows the engine duct/nozzle doors open. |
|
 ★Here are the three positions for the engine duct, one for each of the model types that can be selected. |
 ★A comparison of F-35A and F-35B nozzles on our models. |
|
 ★The landing gear can also be assembled compressed or uncompressed. |
|
 ★Compare the F-35A and F-35B canopies. This kit includes 2 sets of canopy parts, which can be swapped in and out after assembly. |
 ★The cockpit has accurate depictions of the differences from the F-35A, and showcases superlative detail. |
|
 ★The pilot figure has headgear with the helmet mounted display (HMD). |
|
 ★Clear parts recreate the EOTS fairing under the nose. The nose landing gear bay is integrated with the lift fan sides for accurate assembly. |
 ★If used, the stand is screwed into this location. The hole is covered by a magnet-affixed part. |
|
 ★A truly comprehensive set of decals is included in the kit, for aircraft markings and stencils. Masking stickers are also provided. |
|
 ★Take a closer look at the various marking options in the kit. |
 ★Painting and marking guides are in full size and full color (this image shows stencils and two USMC marking options). |
|
 ★Five more marking options are also detailed! |
|
 ★Click here to take a look at all of the sprues in the kit |
Tamiya Color paints for painting the 1/48 Lockheed Martin® F-35®B Lightning Ⅱ® |
Tamiya Color Spray Paint for Aircraft |
Tamiya Color Spray Paint for Aircraft
|
AS-12 Bare-metal silver |
AS-26 Light ghost grey |
Tamiya Color Lacquer Paint |
Tamiya Color Lacquer Paint |
Tamiya Color Lacquer Paint |
LP-14 IJN gray (Maizuru Arsenal) |
LP-15 IJN gray (Yokosuka Arsenal) |
LP-36 Dark ghost gray |
LP-59 NATO brown |
LP-12 IJN gray (Kure Arsenal) |
LP-34 Light gray |
LP-37 Light ghost gray |
LP-61 Metallic gray |
LP-62 Titanium gold |
LP-63 Titanium silver |
— |
— |
Tamiya Color |
Tamiya Color |
Tamiya Color |
X-1 Black |
X-2 White |
X-6 Orange |
X-10 Gun metal |
X-11 Chrome silver |
X-12 Gold leaf |
X-14 Sky blue |
X-17 Pink |
X-18 Semi gloss black |
X-23 Clear blue |
X-28 Park green |
X-32 Titanium silver |
XF-1 Flat black |
XF-2 Flat white |
XF-3 Flat yellow |
XF-5 Flat green |
XF-6 Copper |
XF-7 Flat red |
XF-9 Hull red |
XF-16 Flat aluminum |
XF-19 Sky grey |
XF-22 RLM grey |
XF-23 Light blue |
XF-25 Light sea grey |
XF-49 Khaki |
XF-54 Dark sea grey |
XF-55 Deck tan |
XF-56 Metallic grey |
XF-59 Desert yellow |
XF-60 Dark yellow |
XF-61 Dark green |
XF-63 German grey |
XF-85 Rubber black |
★Useful tools and materials in the construction of your model Item 74049 Basic Drill Set Item 74112 Fine Pin Vise D-R (0.1-3.2mm) |
★For a professional finish on metal parts Item 87204 Metal Primer (40ml Bottle)
|
★Precision cementing Item 87062 Tamiya CA Cement (Quick Type) |
★Present your model as it deserves to be displayed Item 73010 Display Case H |